بازار

فروش ترموستات ساموان

جهت خرید محصول با ما تماس بگیرید:
دفتر فروش تهران: بازرگانی تیکوا نیرو – آقای مقدم
تلفن های تماس:
33999115 – 33999719 -33113566
OFF OFF OFF OFF
ON ON ON ON
SV=50.0,diF=5.0,dLt=0,tyP=H SV=-25.0,diF=5.0,dLt=0,tyP=C
▶In order to change the delay timer setting, press SET key for longer than 5 seconds
while the display unit shows the current temperature. Release the key when the
display
unit shows diF. Press SET key several times to select dLt.
▶After selecting a value using Up or Dn key, press SET key to store the setting in the
memory.
Description: When the delay time expires, the output turns on.
User Item Setting Description
setting dLt 0~240sec Output become on after specified time
▶How the delay timer works
Case: the delay time is 0 second =) the relay turns on as soon as output signal arrives.
▶The following diagram shows configurable items. Select an item by
pressing set key.
▶Make a note of the factory default settings before changing any one of them. Before
making any change, understand and verify the validity of your setting(s).
▶Invalid factory settings may require service from the manufacturer.
Normal/Reverse Control
Hysteresis
0.1℃~ 9.9℃
Delay time
0~240sec
Normal/Reverse selection
C:Coller,H:Heater
rSt Sensor input correction
-50.0~+50.0
Press set key when the display unit
shows a current temperature
Press set key for longer than 5 seconds
to save the configuration.
StH
StL
Upper limit temperature
Temperature Range for each sensor
Keep pressing set key until you
see StH on the display unit.
Release the key when the
display unit shows StH.
※ diF 가 나타나면 다시 하세요
Loc
Lower limit temperature
Temperature Range for each sensor
Locking Function for user
0:Release, 1:Locking
Heater(Normal)
tyP=C
Cooler(Reverse)
hysteresis diF=1.0 hysteresis diF=2.0
8. Normal/Reverse output 8. Normal/Reverse output Normal/Reverse output
delay time when dLt=0
delay time when dLt=5
0sec 5sec 10sec
Relay Off Relay On
Relay Off Relay On
Aux Output(Alarm) Aux Output(Timer)
Pro on Timer on setting
0~999Min
oFF Timer off setting
0~999Min
Alarm Setting Temp.
Temperature Range
for each sensor
Factory Setting Items
11.Factory default settings 11.Factory default settings Factory default settings
diF
dLt
tyP
Alarm hysteresis
0.1℃~ 9.9℃
Alarm delay timer
0~240sec
Aux output:Timer/Normal/Reverse Selection
C:Cooler,H:Heater(C:Upper Alarm,H:Lower Alarm),t:Timer
7.Hysteresis setting 7.Hysteresis setting Hysteresis setting
Turn off the power. Turn on the
power while pressing set key.
To go back to the top, press set key
Press set key for longer than 5 seconds
to save the configuration.
To go back to the top, press set key
Main output setting
Case: the delay time is 5 seconds =) the relay turns on after 5 seconds upon the arrival o
output signal.
① You can prevent a user from changing a pre-set configuration.
▶Turn off the power. Turn on the power while pressing set key. Keep pressing set key
until you see StH on the display unit. Release the key when the display unit shows StH.
▶Press set key several times to select Loc. Set the configuration as following using Up
and Dn keys
Item Setting Description
0 Unlocked – a user can change settings
Factory
Setting
Loc
جهت خرید محصول با ما تماس بگیرید:
دفتر فروش تهران: بازرگانی تیکوا نیرو – آقای مقدم
تلفن های تماس:
33999115 – 33999719 -33113566